Care & Conservation Guide for Organic Mud Art
Craftchirp artworks are crafted from living, natural materials—purified cow dung, river clay, and mineral pigments. With sensible architectural placement, they remain vibrant for generations.
Sunlight & UV Exposure
Display indoors in gentle, ambient illumination. Avoid uninterrupted direct exposure to harsh tropical midday sun to safeguard natural rice paste and soot pigments.
Humidity & Moisture
Ideal room relative humidity is 40% to 60%. Do not mount artwork directly inside humid unventilated bathrooms, above indoor pools, or beside active humidifiers.
HVAC & Heating Vents
Keep artwork at least 1.5 meters away from forced-air radiator vents or direct cold air drafts to prevent rapid cyclical expansion and contraction of the MDF ground.
Cleaning & Conservation Protocol
Recommended Cleaning Routine
- •Dust lightly every 2 to 3 months using a dry, extra-soft natural bristle artist brush (such as goat hair or fan blender brush).
- •Sweep the brush horizontally in gentle, featherlight motions across the textured relief lines.
- •For the frame or outer wood edges, use a dry, clean microfibre cloth.
Actions to Strictly Avoid
- ✕Never use water, wet sponges, or damp wipes. Moisture can soften the natural acacia gum and rice paste relief.
- ✕Never spray glass cleaners or household aerosols anywhere near the painting. Chemical propellants will stain the organic mud base.
- ✕Avoid scrubbing or pressing down on the relief figures.
Architectural Installation & Hanging Guidelines
All Craftchirp paintings on MDF are delivered with pre-installed, heavy-duty brass D-rings on the rear, leveled and tension-tested for the artwork's specific weight.
- For masonry, plaster, or drywall, use high-grade wall anchors rated for at least 5 kg (11 lbs) to ensure firm support.
- Maintain a slight 2mm air gap between the MDF backing and the wall surface by using small silicone bumper pads (included in your delivery pack), ensuring optimal air circulation behind the board.
- If framing behind glass, we recommend choosing museum non-reflective UV-filtering glass with a spacer frame of at least 10mm so the glass never touches the textured relief surface.
Handmade Terracotta Jewellery Care
Craftchirp jewellery pieces feature kiln-fired terracotta beads and pendants mounted on hypoallergenic 316L medical-grade surgical stainless steel:
- Store separately in the provided velvet pouch to prevent scratches against metal chains.
- Apply perfumes, body oils, and hair lacquers before putting on your jewellery.
- Remove before swimming in chlorinated water, showering, or vigorous sports.
- Wipe steel findings with a soft dry lint-free cloth after wearing.
Have questions regarding restoration, framing, or specific climate considerations?
Consult Our Conservation Studio